Freephone 0800 606061

Youtube   Facebook  

Versalift VTL41 EWP on Isuzu NPR325 4x2 truck

Versalift VTL41 EWP on Isuzu NPR325 4x2 truck
Versalift VTL41 EWP on Isuzu NPR325 4x2 truck
Versalift VTL41 EWP on Isuzu NPR325 4x2 truck
Versalift VTL41 EWP on Isuzu NPR325 4x2 truck
Versalift VTL41 bucket controls
Versalift VTL41 easy access to bucket
Versalift VTL41 outrigger pad storage

EWP Specifications

EWP Manufacturer
EWP Model
Insulation rating
Low voltage
Working height
Height (ground to bucket floor)
Working radius
Boom style
Telescopic with Jib
# of telescopic boom sections
Maximum bucket capacity
120kg/ 230kg
Bucket dimensions
Control Type
Proportional - electric/hydraulic
Utilities (street lighting / faults / telecommunication)
Building wash and maintenance
Cell phone towers
Billboard installation

Vehicle Specifications

Stock #
Vehicle Manufacturer
Vehicle Model
NPR325 (Class 1) or NPR350 (Class 2)
Axle config

Stock #: BT6-4


The new VTL series from Versalift provides an exceptionally good working envelope and the compact Isuzu truck the boom is mounted on is very manoeuvrable and cheap to run. High tensile steel booms designed using the latest technology provide exceptional reach and are easy to operate. With LV-rated 2-person bucket plus deck space and payload in excess of 1000kg, this new design is ideally suited to anyone working on or around the LV network in urban areas. The 4 outriggers only protrude a small amount from the side of the truck and provide excellent correction and stability when working on inclines or uneven surfaces, plus they can be controlled from either inside the cab or from the bucket controls. The VTL41 is the perfect solution for a wide range of applications including streetlights, fibre, faults and telecommunication.

EWP details 

The LV insulated Versalift VTL41 has a vertical reach of 14.5m and horizontal outreach 8.2m. High strength steel outer and aluminium inner boom with the articulation going from 8° below horizontal to 115° above horizontal plus the additional fly jib. The boom can be operated up to full height and within 5 degrees from centre without deploying the outriggers, which means set up can be especially fast when working directly overhead. The fibreglass bucket has a SWL of 230kg and is large enough to fit 2 people plus equipment. The bucket stows low down at the rear and has a side door entry which is easy for operators to access the bucket. Please refer to range diagram for full working envelope.

Truck details 

This boom can be fitted to a wide range of vehicles depending on the customer's application, however we have used the Isuzu N series cab/ chassis which can be set up on either a class 1 (NPR325) or class 2 (NPR350) licence, depending on what additional payload is needed. The Isuzu NPR325/ NPR350 offers an excellent combination of robust build quality and driver safety. The option is available to have either AMT or manual transmission and a great range of driver comforts make this a popular vehicle for drivers and passengers alike.


Speak to Waimea today as alterations can be made to accommodate your needs without changing the fundamental design of the truck. Build-up 'turn key' package options available, please contact us for more information. 

Please note 

Photos show recently completed boom mounted on an Isuzu NPR325 truck. Range diagram shows boom on a different vehicle. We can customise the build-up to suit your specific requirements, please contact our sales team to discuss a solution that meets your requirements. 


Read more about this brand:

PLEASE NOTE: Images may show optional extras. While every effort has been made to ensure information on this website is both true and correct, Waimea Truck and Crane assumes no responsibility or liability for any errors or omissions in the content of this site.